Public Group
active 2 years, 6 months ago2 Common Issues With The Shark Navigator Lift-Away: Solutions
With several Shark vacuum model NV360 evaluations, customers would be unable to stop encountering issues when using the device. Hence, the post will provide the solutions for two common difficulties that the device may encounter.
The Vacuum Has a Bad Smell
Dirty filters
Filters are among the most crucial elements of a vacuum cleaner, according to several Shark NV360 Reviews sites. The foam and felt filters should be cleaned every 1-3 months, and the HEPA filter every 2 years. If not, they may become blocked, preventing the dirt from being separated from the circulating air.
Clean all the dirt out of the filters with warm water to get them clean again. Change the filters if your device continues to stink.
Dust Cup is completely full
The dust cup might also be the source of the odor. When it’s filled, there’s no way for dust to escape. Remove the latches from the sides of the vacuum’s transparent body and slide out the canister after pushing them down to dump the cup. Ensure to put the cup in the perfect place and snap the latches back together after dumping the dirt.
Stuck Objects
When an item becomes trapped in the vacuum’s air route, it may emit a foul odor and prevent the product from reaching its assigned container. Furthermore, the irritating odor might be coming from the roller brush, which has a buildup of trapped dust clouds.
To solve the problem, check at the base of the Shark navigator lift away deluxe NV360 with the roller brush to see where the object is lodged. Check the air routes, such as the handle and tubes, whether there is no dirt in the brush.
If the roller brush becomes clogged, remove the dirt that has gathered around it with care. If the task becomes too difficult due to seriously stuck items, try not to recover the object with the roller brush.
If the items are in the air paths, latches on both sides of the connection can be used to remove them. Detach the tubes and dust bags by pulling and pressing on them simultaneously.
Vacuum Doesn’t Turn On
Power Cord Issues
Several consumers have complained that the Shark Navigator 360 does not turn on as expected when switching on the power button. The power cord is mainly to blame.
To begin, make sure the power cord is appropriately and thoroughly inserted into the power outlet. Furthermore, customers can try a different power socket if the current one isn’t working correctly.
Secondly, the issue might be caused by a damaged power cord. In this instance, changing the cable is ideal for both effectiveness and security, especially if you find that the vac only switches on when the line is oriented in a specific way.
Power Button Failure
You can operate the device so long as the button can change between power and various surface options. If it isn’t, changing it will be beneficial.
Main Motor Failure
If the airflow is limited for whatever cause, the main motor must shut down to preserve the vacuum. Hence, you must verify if anything is blocking the airflow, such as a trapped item.
Finally, here are some of our suggestions for resolving your Shark NV360 difficulties.