How to inspect surgery lamp?

This topic contains 1 reply, has 2 voices, and was last updated by  Mingtai 1 year ago.

  • Author
  • #16428
     Wahid Feroj 

    how to inspect it?


    1. Daily inspection
    -Bulb working condition.
    Method: Put one paper in working area, if arcuate shape shadow appears, the bulb should be changed
    -Disinfecting handle condition.
    You can hear 2 click sound when installation
    Wash surface with weak alkaline solvents (soapy water), Chlorine solution (bad for metal) and alcohol lotion (bad for plastic and paint) are prohibited

    2. Month inspection

    Mainly check back up battery.
    Method: Cut off power, then check whether the battery is started

    3. For halogen operating light, the bulb life is about 1500h; for bulb socket, generally it should be changed one time in 1 year

    4. Annual inspection
    Tight: Power line connector/ Screw/ Brush
    Adjust: Rotation limit/Power/Joint brake
    Inspection: Hanging arm verticality and balance/Joint screw condition/Joint brake condition/Rotation limit/ Cooling effect/Bulb and bulb socket condition
    Detection: disinfecting handle installation/Illuminance/Spot diameter

    Shandong Mingtai Medical Equipment Group Co., Ltd support professional service to you.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.


We're not around right now. But you can send us an email and we'll get back to you, asap.


©2018 A Venture by Megri Soft Limited a 23 year old Web Company in Chandigarh

Log in with your credentials


Forgot your details?

malatya escort türk porno mersin escort elazig escort erzurum escort sivas escort porno izle porno izle sikiş izle malatya escort mersin escort elazığ escort malatya reklam malatya tabela malatya led tabela seo